Soft comfortable car slippers will appeal to any kid.
It is necessary
- - blue felt;
- - black and white flaps (for wheels);
- - yellow-pink terry cloth;
- - artificial leather or thick oilcloth (25 * 25 cm);
- - 30 * 50 cm volumenflyse H 630;
- - 4 orange buttons (diameter 2 cm);
- - 4 red buttons (diameter 1.5 cm);
- - 50 cm of tank black cord;
- - threads;
Instructions
Step 1
The length of the foot is 18 cm. Make patterns of the details in full size.
Step 2
Lay out the paper patterns on the seamy side of the materials in the direction of the shared thread, circle the contours with chalk. The right and left parts are cut out symmetrically, with a 1 cm seam allowance.
Step 3
When cutting, it should turn out: the side part of the slipper (4 parts each) made of blue felt, terry cloth and volumenflyse; wheel (16 parts) made of black felt; inner circle (8 pieces) made of white felt without seam allowances; sole (2 parts each) made of artificial leather, lining fabric, volumenflyse; front bumper (2 parts) measuring 1, 3 * 10 cm made of white felt without seam allowances.
Step 4
On the wrong side of the side of the slipper made of blue felt fabric, glue volumenflyes. Then sew the marked lines and the doorknob on the right side with black thread using a heavy zigzag stitch with a stitch width of 2 mm.
Step 5
Stitch the darts on the side of the slipper. Place one small white circle on top of the black circles, and sew with dense zigzag stitching with black thread. These will be the front wheel halves.
Step 6
Then fold the rear (black) halves of the wheels with the front ones front side to the front side. Stitch, leaving a small area open. Cut the seam allowances, turn out, sew open areas.
Step 7
Place the finished wheels along the markings on the side parts of the base, stitch along the circumference of the white circle. Sew the front middle seam up to the cross mark, cut the seam allowances along the roundings. Sew on the white felt front bumper with black zigzag stitching according to the appropriate markings.
Step 8
Sew the rear middle seam, the rear bumper stitch in the same way as the front one. Assemble the pieces from the lining fabric. Stitch the darts, sew the middle seam to the cross mark and the back middle seam of the parts.
Step 9
Fold the lining with the slipper right sides, machine stitch the upper cuts and the cut to the cross mark. Cut the seam allowances around the rounding. Turn the slipper out so that the terry lining is on top.
Step 10
Press the volumenflyes onto the sole, onto which the lining piece is placed. Sweep all 3 layers along the outline of the sole. Stitch the sole to the slippers, aligning the marks (front side to front side), cut the rounding allowances.
Step 11
Overcast seam allowance, turn out slippers. Sew along the markings with orange buttons for headlights and red for taillights. Cut the cord in half, thread the laces into the slippers, according to the markings on the details. Tie your laces with bows.
