If you need to remove text written in ink or a ballpoint pen from paper, you can use some of the tools you can make yourself. Then you do not have to rub the sheet with an eraser almost to the holes or use a corrector.
Instructions
Step 1
Mix equal amounts of glycerin and ethyl alcohol and process the text written in ink. A fresh ink stain is also removed with warm steamed milk or yogurt.
Step 2
The same ink, and at the same time the paste from the fountain pen, can be removed with a special liquid, which consists of two parts.
Step 3
The first part is prepared as follows: add potassium permanganate in small portions to distilled water (50 ml, t = 25-30 ° C), stirring constantly until the potassium permanganate stops dissolving. Then add 50 ml of cold acetic acid. Prepare this composition immediately before use, as it will quickly lose its activity.
Step 4
The second part of the composition: in distilled water in an amount of 100 ml of the same temperature as mentioned above, add 1-2 tablets of hydroperite.
Step 5
Apply with a light touch the first part of the composition to the stain with a cotton swab wound around a match or a cotton swab, but do not rub. Repeat the processing after a few seconds. Then take the second part of the composition and discolor the stain with it. Also, don't rub.
Step 6
Another remedy: mix a teaspoon of vinegar concentrate (70%) with crystalline potassium permanganate (on the tip of a knife). You can process text.
Step 7
Next, put another sheet under the sheet, white, clean. Take a soft brush, dip it in a solution of potassium permanganate and vinegar concentrate and drag over the text on the paper until it disappears. The paper will darken, but you can discolor it with a cotton swab dipped in hydrogen peroxide.
Step 8
While the treated area is still damp, iron it with a warm iron. To do this, place a soft cloth under a blank sheet, and put a sheet with the deleted text on top. The surface of the iron must certainly be glossy, clean, otherwise you will have to iron through the fabric. This method is suitable for thin paper.
Step 9
If the paper is thick, use a cotton swab or match with a cotton swab wound around it. Prepare more of such matches or sticks so that they can be changed as they become dirty. Wet each new match with a solution and trace the text along the contours.
