A logo is the face of a company or trade mark, which makes it recognizable in a crowd of others and creates a unique and inimitable brand. The logo can be made more original by adding a number of visual effects. To make an example of a glowing logo, you do not have to make an expensive order in an advertising company - you can make such a logo yourself, especially since the technology of its production is very simple.
Instructions
Step 1
For a logo, choose a small image that has fairly smooth and smooth edges without small elements that go beyond the boundaries of the picture.
Step 2
Print the picture in several copies on a color laser printer at home or in the printing industry using a special matte film for laser printing.
Step 3
Cut out an image from the film and place it between two thin sheets of plexiglass, gluing them together with silicone sealant. Carefully cut out the outline of the pattern from the resulting plate.
Step 4
You can transfer the image to a sheet of plexiglass and in the opposite way - by warming up the printed picture with an iron through a sheet of paper, face lying on the plexiglass. Iron several designs in a row in the same place for brighter colors. Then spray the drawing with acrylic varnish. Just as in the first method, cut the drawing along the contour.
Step 5
To make your logo glow, use three to four bright white LEDs. Mount them in a pre-prepared case - for example, in a tin can, on a small microcircuit. Place a plexiglass diffuser on the finished case with installed diodes. Lead the insulated wire out.
Step 6
Now cut out the outline of the logo on the body, degrease the surfaces to work with and place your logo there. Fill it with clear epoxy, piercing the bubbles. Sand the epoxy surface after hardening with a fine sandpaper. After that, you can plug the wire into the network and look at the beautiful glowing logo.
