How To Make Decoupage On A Plate

Table of contents:

How To Make Decoupage On A Plate
How To Make Decoupage On A Plate

Video: How To Make Decoupage On A Plate

Video: How To Make Decoupage On A Plate
Video: Decoupage On Plate | Decoupage for Beginners | DIY Decoupage on Ceramic Plates 2024, December
Anonim

In order to make decoupage on a plate, it is not at all necessary to have an art education. The main thing is to have the desire and the necessary knowledge about the methods of working in the decoupage technique. For a novice needlewoman, it will not be difficult to make decoupage on a flat surface. The plate will take a little longer to work. But the result will give you a lot of pleasure and pride in your creation.

How to make decoupage on a plate
How to make decoupage on a plate

It is necessary

  • - flat plate white
  • - white acrylic primer
  • - acrylic paints
  • - soft brushes
  • - acrylic lacquer
  • - sponge
  • - water
  • - PVA glue

Instructions

Step 1

In order to make decoupage on a plate, we will take a flat plate of white or any other color. Degrease it with alcohol or dishwashing liquid. Wipe the plate dry. Apply acrylic primer with a sponge with stamping movements.

Step 2

The primer on a plate with a pattern or another color for decoupage technique must be applied several times in order to completely hide the original surface. Apply each new layer after the previous layer has completely dried. We apply several layers of acrylic varnish on top so that the soil does not deform when decoupage is applied to a plate.

Step 3

We divide the napkin for decoupage into three layers. Leave the topmost layer. We neatly cut off the drawing along the edge so that there are no sharp boundaries. We dilute PVA glue with water in a ratio of 1/1 and pour a little on a plate. We put the prepared decoupage napkin in the center and smooth out the folds with a brush, helping with our hands. Remove excess water with a cotton napkin.

Decoupage plate
Decoupage plate

Step 4

Then, after the napkin is dry, cover the plate with several coats of acrylic varnish.

Step 5

Now we draw on the missing fragments with acrylic paints and select the drawing. Apply a contour if necessary. It is good for them to do various inscriptions on decoupage. We cover with more layers of acrylic varnish. You can use matte or glossy varnish.

Step 6

In conclusion, we glue the mount to the plate and hang it on the wall. And you can give it, if not a pity. Although, give, you will also make decoupage on a plate. It's so exciting to feel like an artist.

Recommended: