A commercial hair bagel isn't right for you? Is it too big or, on the contrary, small? Not a problem. You can make a hair bagel at home. Thanks to this, it can be adjusted exactly to the length and thickness of your hair.
It is necessary
- - foam rubber
- - needle
- - a thread
- - scissors
Instructions
Step 1
Prepare the foam first. It should be 2-3 centimeters thick to better adjust the thickness of the future donut. Measure the diameter you need so that there is a hole in the center that you can easily pass all of your hair through. Cut to measure. The hole should not be too large so that the donut does not fall off, and small, otherwise the hair may simply not fit.
Step 2
So, we measured the length of the donut, now let's start measuring the foam rubber in width, i.e. into future thickness. Roll the foam rubber to the thickness you need, mark a line in this place with a pencil, cut along this line.
Step 3
Unroll the foam rubber. You should now have an even rectangle. From one side, cut about 4-5 cm to half the width, in order to then connect the ends of the donut well.
Step 4
Now twist the foam rubber tightly, fasten the edge to the main part with pins so that it does not unwind. Sew on this edge using donut-colored threads. Remove the pins.
Step 5
Since we cut a small piece on the side, there is an empty space left on one edge inside us. Insert the other end of the foam roller into it. Sew these edges in several rows.
Step 6
The hair bagel is ready. Now you can do gorgeous neat hairstyles.
