Winter gives us a lot of joy, children go sledging and ice skating, older ones go skiing, adults learn snowboarding. People who are far from sports prefer to ride down slides, for example, on car tires or cheesecakes.
Instructions
Step 1
If you have an unnecessary car camera, do not throw it away, it is from it that you can make the most popular sled now - cheesecakes. The main thing is to find a durable fabric that will be attached to the bottom of the "cheesecake" and it is important that the fabric glides well and remains intact.
Step 2
Draw two identical circles on the pieces, this is how the top and bottom of your sled will look like. In terms of diameter, the circles should be equal to the diameter of the tire plus half of its thickness, and also do not forget about a seam allowance of about 1 centimeter.
Step 3
Now find the middle of the top circle, fold it in half and then in half again. Mark the found middle with chalk. Next, you will need to unfold the circle and draw a circle with a diameter of 30 centimeters.
Step 4
Cut a hole and carefully sew a sling of the desired length along the edge. From the same sling, sew two handles to the edge of the sled (to the front side).
Fold both sides (top and bottom) right sides. Remove all interfering parts from the fabric, it should be flat. Reinforce the seam with nylon tape.
Step 5
Insert the camera into the case (just turn it out first) and inflate it. Just do not overdo it, if there is more air than necessary, then the sled will spring, and if, on the contrary, there is not enough air, then the sled will go badly.
