If your TV does not "catch" and the channels are not clear, you should think about installing a new antenna. You can connect yourself to DTV standard television in record time and without special financial costs. With the help of these instructions, you will be able to watch high-quality digital TV at home.
Instructions
Step 1
Find a coupon for connecting DTV standard television or order a connection. Of course, it's better to connect with a coupon - you can save money with a discount.
Step 2
We buy a pair of 0.5 liter aluminum cans and empty them. You can go inside, you can and can not. The radio frequencies of interest to us are in the range from 300 MHz to 3 GHz, which is equivalent to a wavelength of 10 cm to a meter. Our aluminum cans, properly connected, will intercept such waves without any problems.
Step 3
Cut off one third of the can. The effect of the remaining two-thirds will be good, but, in principle, the cans do not need to be cut off. It really depends on your imagination. We tie the wires to the bank to connect our homemade antenna to the TV. This can be done by exposing the end of the wire and looping the can opener in a loop.
Step 4
We do all the above operations with the second bank. We are looking for a pipe made of thick cardboard. We will install our cans in it, fastened to each other with a wire, so that they are more securely connected there and so that our antenna does not collect dust.
Step 5
We drill a hole in the tube and pass the wire through it, the end of which we attach to the antenna "connector". Then we put the cans in the pipe, and that's it. Our antenna providing access to high-quality digital TV is ready.
