The very first yo-yo in history had a fairly simple design. Her rope was attached to the axle very firmly, almost firmly. Modern models are made a little differently. They can fall asleep as the rope is looped around its axis. Sleep mode allows you to perform a variety of tricks with your yo-yo.
It is necessary
Yo-yo, silicone sealant, small hex wrench, oil
Instructions
Step 1
Decide what kind of work you want to do with your yo-yo, what tricks you plan to do. Depending on what properties you want to improve, you can choose the method of working with the yo-yo. With a certain type of repair, you can increase the duration of the sleep mode.
Step 2
Stock brakes can be glued fairly easily with silicone sealant.
Step 3
If the axle is too tight, it can be unscrewed with a hex wrench.
Step 4
To prevent the axle from jamming in the future, you can drop a little oil into it.
Step 5
When twisting the halves of the yo-yo, you need to make sure that the rope is located on the bearing. Otherwise, after the first throw, the rope may break.
