Balancer fishing is the most common way to catch a predator in winter. A spinner is called a balancer, which hangs horizontally on the fishing line, and when twitching in the water, it makes pendulum vibrations.
It is necessary
- - fishing rod;
- - balancer;
- - ice screw.
Instructions
Step 1
Take a balance bar no more than 5 cm long, of a fairly bright color, for example, imitating a perch - with a blue or green back and stripes on the sides. It is desirable that there is a fastener for hanging the tee on the belly of the balancer. Hang a small tee such as # 3.
Step 2
Prepare about 20 m of line with a thickness of 0.25-0.3 mm. The line should end with the smallest swivel with a fastener to prevent twisting and easy spinning. The rod should be equipped with a large spool (10-15 cm) to quickly rewind the line from hole to hole. At the same time, the ice screw must be ideally sharpened for drilling a large number of holes, typical for this type of fishing.
Step 3
Drill a hole. Lower the balancer to the bottom. Then swing the rod for about 10 strokes with a short pause. Remove the spool from the stopper and wind up the line (approximately 5 spool turns). Do 10 sweeps again and reel in the line again. If in this way the balancer was brought almost to the hole, then you need to get up and move on - drill the next hole further along the heap or shallow.
Step 4
At the first bites, i.e. when a perch is found, fishing begins. After the bite, do the hooking, then take the fish out. Pull the hook out of the fish. Everything needs to be done quickly enough, so you need to have pliers in your pocket to take out the hooks.
