If you are fond of fishing, then every season you need special summer tackle for catching predatory fish - pike, perch, and other types of fish. It is best to catch predatory fish in the summer on a simple summer girder, which can be either purchased in a store or made from scrap materials without spending a penny of money. To make a summer vest, you need simple plastic water bottles with a volume of 0.5 liters.
Instructions
Step 1
Cut both bottles in half with a sharp knife. You should have two bottoms and two tops with caps from both bottles. The top of the bottle should fit into the bottom with the top down.
Step 2
Poke a hole in the cap of the top of the bottle with an awl and thread a line through it. Then make another hole in the center of the bottom of the bottom of the bottle. Assemble the girdle using a millimeter line, threading it through the bottom of the bottom of the bottle. This way, the bottom of the bottle will become the top of your summer vest.
Step 3
Make a loop on one side of the line so that the girder can be suspended, and on the opposite side, make a knot. Pass the fishing line into the cap of the upper part of the plastic bottle and, stepping back 17-18 cm from the knot, tie another knot behind the bottle cork. The top of the bottle will become the bottom of the vent.
Step 4
Fasten the fishing line in the two openings of the bottle neck and wind the required length of fishing line with a sinker and a tee hook, and then insert the lower part of the vest into the upper one. The line with a sinker and a hook will come out of the gap between the two parts of the girdle.
Step 5
Paint the top of the vents with white paint and the bottom with red. If a predatory fish pecks on the hook, the lower part of the girdle will fall out of the upper part and let you know that the fish has pecked and needs to be pulled out of the water.
