I want to tell you how to make a bright belt. It will be a great addition to summer pants or a dress.
It is necessary
- 1) 2 threads with a diameter of 2.5 mm and a length of 7 meters - yellow
- 2) 2 strands with a diameter of 2.5 mm and a length of 7 meters - orange
- 3) buckle 5 cm wide along the inner edge - along the width of the belt
- 4) lighter or gas burner
- 5) glue moment
Instructions
Step 1
We take 4 threads with a diameter of 2.5 mm and a length of 2 meters, fold in half and fasten on a buckle.
Step 2
Take 2 thread on the right, pull it out from the buckle and tie 1 rep knot on it.
Step 3
Next, we will tie 2 rep knots on the 3 thread on the right.
Step 4
Now, on the 5th thread on the right, we will tie 4 rep knots: first with the 4th thread, then the 2nd, 1st and 3rd, respectively.
Step 5
As you can see, 4 threads converge to the right to the center. We form the middle of our rhombus - for this, on the 3rd strand on the right, we will tie the 4th strand a diagonal knot from left to right.
Step 6
We close the middle of the rhombus - for this, on the 4th thread on the left, we will tie a rep knot with the 4th thread on the right.
Step 7
We begin to close our rhombus: on the right and left on the 1st thread, we will tie the 2nd thread with a rep knot.
Step 8
On the 4th thread on the right, we will tie the 3rd thread on the right with a rep knot.
Step 9
With the same 4th thread, we will tie a rep knot from left to right on the 2nd thread to the right.
Step 10
We close our rhombus - for this we tie the orange threads in the center to the yellow threads with rep knots and tie the yellow threads together.
Step 11
We put 5 loops on the central yellow threads from the center to the edges.
Step 12
We will tie the yellow threads together with a rep knot.
Step 13
Now, in the same way, we put 8 loops on the extreme orange threads from the center to the edges on the right.
Step 14
Next, we form a belt, repeating paragraphs 4-16. We build up the threads with a gas burner or a lighter so that the edges of the threads do not turn out black. The photo shows the finished belt element. Wet the end of the belt with glue Moment and cut the threads.
