Drawing a baby carriage has a lot in common with drawing cars, trains, and other vehicles. Therefore, you need to draw it with a pencil, charcoal or chalk in exactly the same order as the car.
It is necessary
- - paper;
- - pencil;
- - a picture with a picture of a stroller or the stroller itself.
Instructions
Step 1
Before you start drawing, any subject needs to be carefully considered. Place the stroller in front of you. The easiest way is to draw it from the side, then you don't need to know the laws of perspective. In addition, it will be possible to depict two wheels, not four.
Step 2
Lay the sheet horizontally. Draw a straight line parallel to the bottom edge. The size of this line does not matter, it is needed solely to make it easier to navigate on the sheet. Draw another line approximately in the middle of the sheet. It will be flush with the top edge of the stroller body.
Step 3
Starting from the top line, draw a small "trough". The cradle can be in the form of a rectangle, a trapezoid with a shorter bottom base, or with a lower part in the form of a wide arc. Find the middle of the top line and make any mark. This is where the stroller hood ends. To this point, draw a perpendicular upward to a height approximately equal to the height of the cradle. However, the hood may be slightly higher.
Step 4
Draw the hood. Its front part is already there, and the shape of the back one can be different - in the form of a sector of a circle or resemble the edge of an umbrella. In modern wheelchairs, the second option is more common. Draw the lower edge of the hood parallel to the top edge of the carrycot. Continue the same line further, until it intersects with the contour of the cradle - after all, the stroller also has a canopy that protects the child from bad weather.
Step 5
Starting from the middle of the bottom edge of the cradle, draw the mechanism to which the wheels are attached. It can be, for example, in the form of an oval. On some strollers, this mechanism looks like a diamond from the side. Imagine that the long axis of this oval is divided into 4 equal parts. On the upper arc of the cart, mark a point strictly opposite to the one that would separate the quarter from the axis. This point is located on the opposite side of the hood. From the mark, mark the position of the handle. It is located relative to the imaginary long axis at an angle of approximately 135 °. Note that the handle is not perfectly straight, it is slightly curved.
Step 6
Mark the position of the wheels. Draw the inner rings first, they should be just above the bottom horizontal line. Draw the centers of the wheels. Draw tires - circles around the existing ones. These circles must touch the bottom line or its imaginary extension.
Step 7
Draw the knitting needles. They are just short, straight lines radiating from the center of the wheels to the tires. Finish the drawing by painting the embellishments on the carrycot and hood. Draw a handle. Outline the stroller with a harder pencil.
