How To Build A Finger Park

Table of contents:

How To Build A Finger Park
How To Build A Finger Park

Video: How To Build A Finger Park

Video: How To Build A Finger Park
Video: D.I.Y CARDBOARD FINGERBOARD SKATEPARK! 2024, March
Anonim

On the fingerboard, you have the ability to simulate complex tricks by controlling the movements of your fingers. The skateboard has freedom of rotation and conditions for jumping by scaling the deflection of the board, bearings and wheels. Do your fingerboarding trainings at the fingerpark. Moreover, the fingerpark, built with your own hands, instills greater confidence in safety.

How to build a finger park
How to build a finger park

Instructions

Step 1

Make a blank for the ramp. Take a piece of fiberboard of a rectangular shape with the size you need. Prepare a vessel with hot water, you can use your bathroom. Soak the fiberboard until the sheet flexes well. Now wrap the wet piece around the cylindrical object. At home, fingerboarders often use a simple jar for this. Your task is to get your piece of fiberboard rolled into a pipe. Fix the workpiece in a folded position, you can use a weight on top for better fixation.

Step 2

Leave the rolled fiberboard to dry completely for a day. Anyway, you have something to do during this time. Make a support for the curved field. Take straight bars with a rectangular cross-section. Measure the dimensions so that the estimated height of the supports corresponds to the parameters of the ramp according to your plan. Now nail the supports securely to the ramp.

Step 3

Saw out platforms from the same fiberboard along the width of your folded blade, and hammer them first to your ramp at both ends. Strengthen the structure from below with additional bars. For strengthening, you can use furniture corners that are sold in stores.

Step 4

Carry out sanding work, having previously sanded the surface. As a design option, varnish everything. If you wish, you can paint the structure. Secure the ramp to a heavy, level fiberboard base. Finally, secure the finished ramp to a table or floor.

Step 5

Many fingurboarders build a fingerpark from improvised means. Use books for ladders and edges of inclined hills. Instead of books, you can take cassettes and discs. Their surface has the best sliding, so such structures are suitable for performing "combos", "flips" and "manuals".

Place an eraser under the cover of the book cover to make the spreading. You can find inclined objects in your own interior - boxes or furniture accessories.

Step 6

To make a railing, secure the pencil in the indentations on two erasers, or tape the pencil pointing down to a raised platform. Alternatively, use a nail bent at a right angle, drive it into the cassette or into the countertop.

Recommended: