How To Make Finger Videos Yourself

Table of contents:

How To Make Finger Videos Yourself
How To Make Finger Videos Yourself

Video: How To Make Finger Videos Yourself

Video: How To Make Finger Videos Yourself
Video: How to make out with Yourself (For real) 2024, March
Anonim

In our age of high technologies, most of life, including entertainment, has moved to the computer, even children's games are computerized. Despite this, there remain small (literally and figuratively) fun, such as finger videos.

How to make finger videos yourself
How to make finger videos yourself

It is necessary

  • - dense, well-bending cardboard;
  • -insulating tape;
  • -nail polish;
  • -Super glue;
  • - thick threads.

Instructions

Step 1

Legend has it that they were invented by an ordinary boy who was not allowed by his parents to go rollerblading with friends in the park. At home, he made tiny copies of real roller skates and had fun by imitating roller movements with his fingers. He was able, which means that you can make finger videos yourself.

Step 2

Cut two ovals out of the cardboard to serve as the sole of your skates. Then cut out two identical rectangles. Their sides in length should be equal to half the circumference of the sole, and in width - the height of the boot, which you determine, in accordance with the length of your toes, but not higher than the first joint. Glue these parts as follows: bend the rectangle in a semicircle and attach the edge of the long side along the semicircle of the oval.

Step 3

Now cut out four long and narrow rectangles, cut one corner at each. In fact, these will be the sidewalls of the boots. Attach them with the longest edge perpendicular to the sole from the middle of the heel counter.

Step 4

The cut corners should be in front. There should be a distance of about 2 mm between these long plates at the back and front. For the toes of the boots, cut two thin strips and glue them on the inside of the boot. Cover the rise with cardboard blanks of suitable shape.

Step 5

Now take care of the wheels. Use the same cardboard to make 4 narrow strips along the entire length of the boot sole. Use a pin to poke holes in the bottom corners of each plank. On thin screws, first put on the strips, then the "wheels" - for example, beads, or any other material suitable in shape and size, then the second strips and secure with a washer.

Step 6

It remains to carefully glue the wheels to the boot, this is almost a piece of jewelry. Your finger clips are ready. You can decorate them with nail polish, and make laces from threads.

Recommended: