Did you know that roller skating can be done with just two fingers on your hand? Finger rolls are very funny accessories, miniature finger rolls. But they look like real ones! By the way, you don't have to spend money on this cute toy, you can make finger rolls yourself.
It is necessary
- - white cardboard;
- - Printer;
- - double sided tape;
- - plastic card;
- - scissors;
- - construction knife;
- - awl;
- - threads;
- - refill for a fountain pen;
- - wire;
- - markers.
Instructions
Step 1
Take white cardboard. Transfer the blueprint to it. It can be simply printed on a color printer. There is no need to change the dimensions of the drawing: the "rollers" can be adjusted to your finger with the help of laces.
Step 2
Cut out the drawing. Please note that you need to cut not only along the contour, but also along the red lines. Fold the drawing along the green lines. Notice that the blue area in the drawing is where you want to stick the corresponding piece of double-sided tape.
Step 3
Cut out two parts for the frame of the finger rolls from the used plastic calling card, the approximate shape of the frames is shown in the figure.
Step 4
Make wheels for finger rolls. Take an empty auto-pen ink refill and cut four parts of equal thickness. It is best to use a special construction knife for this: if you cut with insufficiently sharp scissors, the wheels may lose their round shape.
Step 5
With an awl, poke four holes in both blanks. Place four castors between the frame parts. Draw a wire that will act as an axis. Secure it by bending the ends slightly on both sides.
Step 6
Attach the finished frame to the "boots" using double-sided tape.
Step 7
Now we can do the decoration. Color the rollers to your liking, and the laces can be made from threads of a suitable shade. To make them, weave a "pigtail" from threads of the required length.
