A bookcase is a very useful thing in the household. It turns out that you can do it yourself. I suggest you the version of the saucers.
It is necessary
- - saucers of different sizes - 2 pcs;
- - metal hairpin with a diameter of 6 mm;
- - wooden beads - 8 pcs;
- - "Super-Epoxy" glue;
- - drill;
- - glass drill with a diameter of 6 mm;
- - hacksaw for metal.
Instructions
Step 1
Install a glass drill on the drill, mark the center of the saucer, then start drilling the hole at low speeds, while remembering to cool both the drill and the surface of the dishes. Do the same with the second saucer.
Step 2
Use a drill to drill holes in the beads. This should not be done at all, but only by 5, and the latter should not be completely drilled out, but only to the middle, since it will be the tip in the whatnot.
Step 3
It is necessary to saw off a piece of the required length from the metal hairpin. Then glue the drilled bead onto the cut with glue.
Step 4
Place a large saucer on a metal hairpin and fix it on top with another wooden bead using glue.
Step 5
Three unreamed beads must be glued to the bottom of a large saucer at the same distance. If the bottom reamed bead interferes with the stability of the future shelf, then simply saw off the part that interferes with it.
Step 6
Next, place and glue another wooden bead on the metal hairpin, which will be the support for the small saucer. It should be approximately in the middle of the stud.
Step 7
Place a small saucer on the newly attached bead, and then fix it, like the first, that is, with another wooden part. It remains only to secure the tip of our craft. The shelf is ready!
