Runes are the writing of the ancient Germans. The magical properties of the runes have been attributed since ancient times. Sources have been preserved that describe runes as amulets, talismans, as healing symbols. Each rune has its own sacred meaning. And each rune, in conjunction with any other, is a magic formula. Formulas were applied to combat swords and axes that improved the fighting qualities of the blade.
Instructions
Step 1
Choose steel for your blade. After processing, you have a blade without a handle.
Step 2
Cover the blade with melted wax or paraffin.
Step 3
Prepare your instrument in advance. You will need: a household or low-power welding machine, a sharp cutter, a container with water, preferably transparent. And, of course, a runic formula, compiled by a professional (you shouldn't risk making the formulas yourself).
Step 4
You have a blade covered with a thin layer of wax, and a sharp chisel that needs to remove excess wax in the shape of the lettering.
Step 5
Connect the "minus" wire from the welding machine to the blade and lower it to the bottom of the water tank, pattern up.
Step 6
Connect a 3x7 cm metal plate with a plastic handle to the plus wire.
Step 7
Bring the plate to the figure 8-12 mm, fix it.
Step 8
Check the timing of the application of runic symbols in the table of magical actions to achieve the best effect.
Step 9
Turn on the welding machine at exactly the appointed time.
Step 10
Move the plate relative to the blade and pattern.
Step 11
Turn off the equipment, take out the blade, wash off the wax with hot water. As a result, there should be a drawing that you drew with a sharp chisel. Most importantly, follow safety precautions.
