How To Make A Hanging Planter For Pots

Table of contents:

How To Make A Hanging Planter For Pots
How To Make A Hanging Planter For Pots

Video: How To Make A Hanging Planter For Pots

Video: How To Make A Hanging Planter For Pots
Video: DIY Plant Hanger - natural and simple 2024, December
Anonim

Fans of the summer cottage are already in full swing preparing for the approach of summer. It is difficult not to notice the seedlings on the windowsills in the spring season. Agree that sometimes one window sill is not enough. It is for this case that I propose to make you unusual hanging planters that can be hung by the window.

How to make a hanging planter for pots
How to make a hanging planter for pots

It is necessary

  • - thin felt;
  • - floss threads;
  • - linen elastic;
  • - decorative colored cord;
  • - safety pin;
  • - synthetic winterizer.

Instructions

Step 1

Before you start making a hanging planter, you need to cut out the turnip parts from felt according to templates. After they are ready, sew the sides with a sewing machine. The edge of the unstitched straight side must be bent by 1 centimeter and stitched. Thus, a drawstring is formed, that is, a tunnel through which the elastic will pass.

Step 2

Now you need to prick a rubber band on a safety pin. Using a safety pin, you can easily push the elastic through the entire length of the drawstring.

Step 3

Next, the craft needs to make roots. To do this, from the threads of the floss, you need to cut several segments, the length of which should be 6-8 centimeters. Then thread the thread into a needle with a large eye and pull it through the felt, fasten it, and then tie knots at the ends of the segments. Do the same with the rest of the threads.

Step 4

In order to make the pendant, you need to cut off a part of the length of 50-100 centimeters from the decorative cord. Sew the edges of the cord on the wrong side of the craft. Put a little padding polyester inside the product. You can insert a pot. The hanging planter is ready!

Recommended: