It is necessary to wear things from raincoat fabric carefully, since streaks and stains from such fabrics are difficult to remove. Due to the specific nature of the material, when using some types of solvents, there is a risk of damaging the silicone film. Therefore, if it is not possible to take the product to dry cleaning, you need to take into account the peculiarities of cleaning such things.
It is necessary
- - vinegar;
- - ammonia;
- - pure gasoline;
- - universal SMS;
- - soap solution;
- - yoghurt whey;
- - shampoo.
Instructions
Step 1
When cleaning the product, pay attention to the symbols on the labeling tape. If there is no indication, then before proceeding to remove the stain, try the product you are going to use on the inside. See if the cleaner changes the color or texture of the fabric.
Step 2
Treat fabrics correctly to avoid sagging and ghosting. To do this, remove the stain by rubbing it in a rotating motion from the edges to the center until it disappears completely. Avoid touching a clean cloth around the dirt with the solution being used. Use a cotton swab wrapped around a match if the stain is small. To avoid streaking after treatment, immediately dampen a cloth around the area to be treated with water.
Step 3
Wipe the desired area with a cotton swab, which is soaked in a mild vinegar solution (1 glass of water - 1/2 tsp) to get rid of water stains or traces of rain. Then wipe the cloth with a clean, damp cloth. Remove stains from the raincoat fabric from perfume or cosmetics by dampening a swab in gasoline. Then wipe the area with a cotton swab dipped in clean water. Use a store bought general purpose synthetic detergent to remove blood stains. If it is not at hand, then rinse the desired area with cold water, and then wipe with a swab dipped in soapy water, and then again with cold water. For this case, do not use hot water, as it will fix the stain even more.
Step 4
Remove the greasy stain by dampening it with yoghurt whey. Then wipe the cloth with a solution of ammonia (1 tablespoon of salt per 1 tablespoon of n / alcohol and a glass of water), and then with a soapy solution. Then rinse everything off with clean water.
Step 5
Remove splashes of street dirt with a soft brush and a soapy shampoo solution. To do this, place a board covered with a clean cloth under the area to be cleaned. Spread a part of the product on it and remove dust by wiping it with a damp and then dry cloth. Rinse everything off with warm water and wipe with a weak solution of ammonia.
