Agree that carrying a phone charger in your bag is not very convenient. It constantly gets confused and gets in the way. That is why I suggest you sew a charger case. By the way, it is useful and not only in this. You can put your phone in it while charging.
It is necessary
- - denim;
- - cotton fabric;
- - buttons of different sizes - 4 pcs;
- - contrasting threads;
- - non-woven fabric;
- - pins;
- - a piece of chalk;
- - scissors.
Instructions
Step 1
In the charger case, the denim will be on the outside and the cotton on the inside. If the cotton for this craft you chose is thin enough, then it needs to be sealed with non-woven fabric.
Step 2
Cut out 2 rectangles of the same size from denim and cotton fabric. Then, with the help of chalk, you need to draw roundness on one edge of the parts. Do not forget to leave 1 centimeter allowances. Cut out the details along the contour. Thus, one edge of the future cover will be rounded, and the other - rectangular.
Step 3
Now the resulting parts need to be folded so that they are right sides to each other, then sew them on a sewing machine. When 3-4 centimeters remain unstitched, the future cover should be turned on the front side. After this procedure, sew up the hole.
Step 4
The workpiece, which turned out to be, should be divided into 3 parts of the same size. To make it easier, make the lines with chalk. On the rounded part of the workpiece, you need to draw a valve, and then cut it out. The edges should be hemmed. To do this, cut the allowance along the arc in several places, and then manually sew them into the inner part of the craft, that is, between the layers of fabrics.
Step 5
It remains to decorate the craft. To do this, sew all decorative stitches and sew on buttons. The largest of them should be such that it fits the size of the valve and can fasten the product. Phone and charger case ready!
