If the baby is already asking to sit with you at the table, then it becomes obvious that the time has come for him to have his own table. At first, it is quite possible to get by with a table that is attached to the feeding chair, but as soon as the child begins to actively move, he will become uncomfortable in the chair. Make a table for him yourself.
It is necessary
Plywood 8-12 mm thick or edged plank 17-27 mm thick
Instructions
Step 1
Give preference to natural materials, it is good if the table is made of maple, birch, beech or pine. You need to cut a canvas 62 cm by 45 cm (this is the working surface of the table), two canvases 45 cm by 50 cm (these are the side panels), a canvas 60 cm by 50 cm (this is the back wall), two canvases 30 by 40 cm (this is the facing drawers), respectively, 4 canvases for the walls of the drawers and 2 more for the bottoms, calculate yourself. If you are making a table for the first time, then it makes sense to use the drawings, in addition, mark the parts so as not to get confused in the joint.
Step 2
Be sure to sand down all the details. Connect the parts of the table using the slotted grooves, they must correspond to the thickness of the material.
Step 3
It is better to connect the bottom and partitions with screws.
Attach the table top to the side wall on the piano hinge and rods. The children's table is simple in itself, it is quite easy to disassemble and does not take up much space.
The bottom of the drawers of the table can be omitted, so you can use them as stools.
Step 4
Cutouts must be provided in the outer wall, they will replace the handles.
It is also necessary to round off all the protrusions and corners so that the child is not injured.
The finished table can be covered with bright paint or varnish.
Step 5
Also, the back side can be adapted for a magnetic board for board games and learning the alphabet, for this paint it black and upholstery with tin.
