Origami art came to us from Japan. This is the transformation of a sheet of paper into some kind of mysterious figure or animal. The paper is folded without the use of glue or other bonding materials. It is noteworthy that the first paper crafts were figurines of the animal world.
It is necessary
- - square sheet of paper
- - scissors
Instructions
Step 1
Take a square piece of paper. A square can be easily made from a regular A4 sheet by attaching a corner of the sheet to the opposite side and cutting off the remainder with scissors. If the scissors are not at hand, then fold the rest over the folded and iron it well. Tear off the unwanted part of the paper along the line after the fold. Draw diagonal lines on the resulting square sheet. To do this, fold the two corners of a piece of paper together and iron. Repeat the procedure for the other two corners.
Step 2
Fold the four corners towards the middle of the sheet and iron along the fold.
Step 3
Fold any two side corners to the center and turn the workpiece over to the back side.
Step 4
Fold the top corner towards the center of the sheet.
Step 5
Bend the two upper corners to the central part and iron it with your hand along the fold lines.
Step 6
Fold the lower sides of the sheet towards the middle.
Step 7
Bend the resulting model in half.
Step 8
Make the hamster's tail by pulling out the inner corner.
Step 9
Bend the pulled out tail at the base of the piece.
Step 10
Wrap the two outer sides of the resulting tail inside the workpiece.
Step 11
Make an incision about 2 centimeters along the outside of the part. If there are no scissors, then you can tear off a small piece of the part from the outside.
Step 12
To make the hamster's ears, fold the two corners up.
Step 13
To create a hamster face, bend the sharp corner of the part perpendicular to it.
Step 14
The hamster figurine is ready.
