How To Make A Curtain Hook With Your Own Hands

Table of contents:

How To Make A Curtain Hook With Your Own Hands
How To Make A Curtain Hook With Your Own Hands

Video: How To Make A Curtain Hook With Your Own Hands

Video: How To Make A Curtain Hook With Your Own Hands
Video: 10 DIY Curtain Rods Ideas That Will Upgrade Your Window 2024, December
Anonim

As you know, curtains are an adornment not only of windows, but of the entire interior as a whole, but, despite this, curtains are considered an independent detail. How to do it?

How to make a curtain hook with your own hands
How to make a curtain hook with your own hands

It is necessary

  • - white satin fabric;
  • - swamp-colored satin fabric;
  • - beads - 8 pcs.;
  • - flat button with a diameter of 3.5 cm;
  • - synthetic winterizer;
  • - glue gun;
  • - scissors.

Instructions

Step 1

From the satin fabric of a marsh color, it is necessary to cut out a strip, the width of which is 15 centimeters, and the length is 100 centimeters. The resulting strip should be carefully folded in half, and certainly so that its front side is inside. Now, using a sewing machine, you need to sew this part along the length and width so that a small hole remains. Then, twist the strip through the hole to the right side and iron it thoroughly. Sew the remaining sides with a blind stitch.

Step 2

Then, from the same satin fabric of a marsh color, you need to cut out a circle, the diameter of which should be 6.5 centimeters. The resulting part must be pulled together around the circumference with small stitches. In the resulting bag, put the filler - synthetic winterizer and a flat button, then pull it off and sew it up. Further, this element of the pick-up should be decorated with small beads.

Image
Image

Step 3

A white atlas is used. From it you need to carve out details that will play the role of petals in the future. There should be 8 such parts, that is, 4 large and 4 small. Turn the petals inside out, sew, then turn out again already on the front side and fill with padding polyester.

Image
Image

Step 4

Next, use a sewing machine to decorate the center of each petal with marsh-colored satin stitches.

Image
Image

Step 5

It remains only to collect the pickup. To do this, you need to sew the petals so that they alternate in size. Once they are collected, pull them together into a single flower. The beaded button should be secured in the center of the craft. Using a glue gun, our product should be glued to a satin strip of marsh color at a distance of 35 centimeters from the edge. Curtain hooks are ready!

Recommended: