Decorating venues, concert stages and various premises is very important today. There are many options and ideas for creating a festive design. One of them is ball shapes for modeling. Try making a balloon clown with your own hands.
What you need to create a balloon clown
You will need latex balloons to create a clown. You can get them at stores that sell holiday products.
Before starting work, prepare:
- balloons B350 red and pink with a diameter of 1 m;
- 2 red balls SHDM;
- 15 black and 2 blue balls ШДМ 260;
- 30 mother-of-pearl, 30 orange, 6 blue, 2 red, 2 black round balls 5 ;
- 10 black, 2 lilac, 2 crimson, 2 light green, 2 yellow, 2 purple, 2 blue, 2 red, 2 pink round balls 12 ;
- scissors;
- double-sided adhesive tape;
- scotch tape;
- calibrators;
- helium;
- a pump for balloons.
DIY balloon clown: step by step instructions
At the end of the black ball, tie 3 knots, one on top of the other. Cut off the resulting triple knot, place it in the large red ball and slide it towards the top of the ball. Hold the knot. Fasten the rest of the red ball with the black one (which you cut off before) under the knot.
Inflate the pink balloon to 0.5m in diameter and the large red balloon to 0.8m, then tie their tails together. Then fasten three "twos" from the 5 "pearlescent balls. Connect all the ready" twos ". You will get a module consisting of six mother-of-pearl balls. Fix it between the pink and red balls.
Prepare one deuce of 11 "and two deuces of 10" black balls. Clip the three deuces together. Fill the other two 12 "black balls with 1 L of water. Attach it to the black module.
Attach the red ball to the black ball module using the blue modeling ball. To create the hand of a homemade clown, make a line of four modules. Create another hand in the same way. Attach the resulting chain arms to the large red ball.
Inflate the 5 "pearlescent balloon to size 1" and the blue 5 "balloon to size 4". Tie them into a knot almost at the end. Push the knot inside the blue ball. Grab the deuce knot and secure it in the ball.
Attach the resulting button to the red ball and secure it with double-sided tape. Make and secure two more of these buttons in the same way.
Use the 5 "pearl and black balls to create the eyes for the clown. Attach them to the pink head ball with double-sided tape. From the 5" red ball, make a nose and attach it to the clown's face.
Use the red sausage balls to create a smiley lips and attach the mouth to the face with double-sided tape. Assemble the black balloon hat and put it on the clown's head with tape.
Prepare eight orange balls and tape them to the clown's head. The result is a tank-like hairstyle. That's it, your homemade balloon clown is ready.
