Figures and structures in the form of pyramids are in any culture, and since ancient times people have guessed that pyramidal shapes have special power and affect the life and health of people. Today, with the help of figures in the form of pyramids, you can experiment at home with the energy field of food, water, and even try to treat diseases using your own small pyramid. From the available materials, you can make a simple cardboard pyramid in the proportions of the "golden ratio".
Instructions
Step 1
The primary value in the pyramid, built according to the golden ratio, is 7.23 cm. You also need to know the coefficient of the golden ratio, which is studied in schools in geometry lessons - it is equal to 1.618.
Step 2
Multiply by 1, 618 by 72, 3 - you get the result, which needs to be rounded to the nearest whole number in millimeters. This number will become the length of the base of the pyramid (117 mm). The height of the pyramid will be 72 mm.
Step 3
Calculate the size of the triangular faces of the pyramid using the well-known Pythagorean theorem. Based on the calculations, you will receive all the dimensions for making the pyramid model - the base of the pyramid will be 117 mm long, its height 93 mm If you don't want an empty pyramid but want to make a bottom for it, multiply 117 by 117 to get the square of the base.
Step 4
According to the calculations obtained, draw all the details on cardboard, plywood, plastic or other material chosen for gluing the pyramid. Use sharp scissors to cut the pyramid out of the cardboard - you will end up with four identical triangles.
Step 5
Lay out all triangular parts on a flat surface and connect their faces. Temporarily connect the edges of adjacent triangles with masking tape. With the last triangle attached, assemble the parts by lifting the model vertically.
Step 6
Glue edges neatly for maximum definition. The corners of the triangles should be perfectly aligned at the apex, and the corners should also be aligned at the base. A properly glued pyramid is neat and stable.
Step 7
Cover the seams of the pyramid from the inside with glue. This is enough if you decide to make a hollow pyramid. If the bottom of the pyramid is planned, it must be glued separately, at the end of the whole work.
Step 8
Remove the auxiliary tape from the seams of the pyramid, and then tune it to its own energy so that the pyramid works in your favor.
