How To Weave An Original Snowflake From Rubber Bands

Table of contents:

How To Weave An Original Snowflake From Rubber Bands
How To Weave An Original Snowflake From Rubber Bands

Video: How To Weave An Original Snowflake From Rubber Bands

Video: How To Weave An Original Snowflake From Rubber Bands
Video: BERWYN - RUBBER BANDS (Official Video) 2024, December
Anonim

Weaving from elastic bands is an exciting activity not only for children, but also for adults. Joint creativity with the child allows you to develop imaginative thinking and get the most of positive emotions from the process. A snowflake made of rubber bands can be both a toy and an original decoration.

Rainbowloom rubber bands
Rainbowloom rubber bands

It is necessary

  • - 1 hook with metal base;
  • - 6 smaller plastic auxiliary hooks;
  • - 42 blue elastic bands;
  • - 37 turquoise elastic bands.

Instructions

Step 1

Prepare all the tools in advance, since it will be convenient for you to quickly weave elastic bands of different colors in the process. Take a steel hook and pull one blue elastic over it. Wrap around the base three times.

Wrapping the elastic around the hook
Wrapping the elastic around the hook

Step 2

As a result, you have a triple loop.

Step 3

Next, take two more blue elastic bands and pull them over the hook in this way.

Pulling elastic bands on the hook
Pulling elastic bands on the hook

Step 4

After that, lower the turns that you originally put on the hook.

Removing the loops from the hook
Removing the loops from the hook

Step 5

Place the remaining loops over your fingers and return to the hook. You will have the upper part of the beam.

The first part of the tip of the ray
The first part of the tip of the ray

Step 6

In the same way, weave two more rays on a steel hook. As a result, you will form three identical branches at the end of the snowflake ray.

All parts of the top of the beam
All parts of the top of the beam

Step 7

Then take two turquoise elastic bands and pull them over the same hook. Throw off all the parts of the ray on the turquoise elastic bands.

Throwing off the parts of the beam from the hook on the elastic
Throwing off the parts of the beam from the hook on the elastic

Step 8

Next, put the elastic from your finger on the hook.

Putting the elastic on the hook
Putting the elastic on the hook

Step 9

Do this two more times and you will have the first ray of the snowflake. Remove this beam on the auxiliary plastic hook.

Ready ray of snowflake
Ready ray of snowflake

Step 10

Using the same principle, weave the remaining 5 rays, each of which must be removed with additional hooks. As a result, you will get 6 separate rays that need to be connected.

Six separate rays
Six separate rays

Step 11

The resulting rays are carefully removed on one hook with a steel base. At the same time, firmly hold the elastic bands with your finger to fix it.

Putting all the rays on the hook
Putting all the rays on the hook

Step 12

Then take one turquoise elastic and pull it over the hook. Then take off the rays from the hook one by one and return the elastic from the finger back.

Throwing off all rays on one elastic band
Throwing off all rays on one elastic band

Step 13

Spread out the resulting snowflake. Remove the back of the elastic from the hook. The front should remain at the base of the hook.

Formation of the base of the node
Formation of the base of the node

Step 14

While holding the snowflake with one hand, pull the hook to the side. This will create a strong knot.

Recommended: