Do you want to freshen up your interior without noticeable expenses? DIY cute, funny decorative pillows in the form of emoticons and they will become a bright accent of any interior.
It is necessary
- - felt of various colors;
- - silicone gun;
- - hot silicone rods;
- - scissors;
- - pencil;
- - filler
Instructions
Step 1
Mark a circle on the fabric with a diameter of 33 cm, do not forget to leave an allowance of 0.5 cm. Cut two equal circles. A machine stitch or hot gun can be used along the edge of the workpieces.
Step 2
Putting together two round blanks, glue the edge with silicone. Try to lay a continuous line of glue, immediately pressing the edges tightly against one another. Leave a small free area for stuffing.
Step 3
Leave the product to dry for the glue for 10-15 minutes. So make 3 pillow bases in total. In the meantime, prepare the details for the first heart-eye emoji. Make eye and mouth templates and transfer them to the fabric.
Step 4
As a result, you should get: 2 red eyes-hearts and a mouth of black felt. Turn out the round pillow base. Pass one hand through the hole left and trim the inside of the edge of the product, gradually running your hand around the entire circumference.
Step 5
With your other hand, press down on the outside to create an even edge. Lay out the prepared parts of the mouth and eyes on the base. Glue with a hot gun.
Step 6
While lifting a part of the part, apply a "line" of glue from the inside along the edge and press it against the surface of the base. Thus, glue all the elements.
Step 7
Insert the filler into the pillow, spreading it evenly around the entire circumference. Carefully seal the hole with hot silicone using scissors to avoid scalding your fingers.
Step 8
Make the rest of the emoji pillows in the same way. For a mischievous smiley, embroider a red line on one piece of the tongue with a back stitch.
Step 9
Lay out the prepared parts on the basis of the second pillow and gradually glue with hot silicone, pressing well. Fill the pillow with padding polyester.
For the Kiss Smiley Pillow, cut out all the details.
Step 10
Glue the 2 heart parts together, applying glue along the edge from the inside. Leave a hole for packing. Fill the heart with filler, seal the hole. Having laid out all the components on the base, glue it.
Step 11
Stuff your pillow.
