A significant number of radio-controlled car models are produced these days. But there are almost no similar miniatures of tanks with remote control on sale. Therefore, in order to acquire a radio-controlled model of a tank, a model of a car will have to be remade into it.
Instructions
Step 1
Buy any radio-controlled car model. The main requirement for it is that it should be, firstly, somewhat smaller in size than the future model of the tank, and secondly, it should move as slowly as possible.
Step 2
If you find a model of a car on the market that can move more slowly, be sure to correct this shortcoming, as a tank moving at high speed will look unnatural. To do this, turn on a bulb from a flashlight in series with each of the engines. Select the parameters of the bulbs in such a way that the speed is slightly higher than the desired one, since in the future it will drop due to the increase in the weight of the model. Do not use resistors instead of bulbs, as they do not have barretting properties and cannot stabilize the current. With them, the motors will stop at the slightest increase in load.
Step 3
Purchase a DIY kit for a stand-alone tank model. This model is not radio-controlled, but it is much more common on sale. Assemble it according to the assembly instructions supplied with it. Wait until the glue has completely hardened.
Step 4
Make a recess in the bottom of the assembled model of the tank so that it can be put on a radio-controlled model of a car. The latter should not be seen at all, at least from above.
Step 5
Place the model tank on the model car in such a way that it does not interfere with the rotation of the wheels. Make sure the latter continues to move in all directions despite the increased mass. If necessary, additionally select the bulbs connected in series with the motors so that the current through them increases slightly.
Step 6
Start using the model you made. Its disadvantage will be the lack of rotation of the tracks and turret of the tank.
