It seems to many that making a model of a tank at home is very difficult: a lot of details, fine work with drawings, which will take a lot of time. However, it is not. Making a tank, for example, as a present for dad is very simple.
It is necessary
three matchboxes, felt-tip pens, a piece of old wallpaper or the cover of an ordinary school notebook (green), a thick journal sheet, a plastic bottle cap (preferably dark), a small piece of dark corrugated cardboard, PVA glue or super strong transparent glue
Instructions
Step 1
Cover the matchboxes. Do it like this: put the two together and paste over them, this is the base of the tank. The third box is pasted over separately, it will become a tower.
Step 2
Assemble the layout. Place the third box on top of the glued together boxes. Glue the tower to the base.
Step 3
Make the muzzle of the tank. Twist a tube from a thick journal sheet, glue it. Puncture a hole in the tower, insert a tube there, cut off the excess so that the muzzle protrudes no more than 5 cm beyond the base.
Step 4
Glue the tracks. Glue a narrow strip of corrugated cardboard to the sides of the tank base. Use felt-tip pens to draw 6 wheels.
Step 5
Glue the hatch. Glue the plastic bottle cap with transparent glue to the tower exactly in the center.
Draw the details. Use a red felt-tip pen to draw a five-pointed star on the side of the tower. The model of the Soviet tank is ready.
