Want to learn something new? Then try your hand at spot painting on glass. You can start with a regular glass bottle. It is more interesting to make a drawing according to a non-standard design. It can be a faceted or rectangular shape for any drink. Dot painting on glass resembles beads. Try to get started. Do not notice how this activity turns into a real hobby.
It is necessary
- - 2 - 3 tubes of contour for glass of different colors (sold in any stationery store);
- - glass bottle;
- - acetone (you can remove nail polish);
- - sheet from a notebook in a cage;
- - scotch tape;
- - pencil;
- - scissors.
Instructions
Step 1
Wipe a clean bottle with acetone to remove the fat layer (required!).
Cut out a strip of paper 2 - 3 cm wide, and 2 cm longer than the volume of the bottle, and, tightly wrapping the vessel, secure the ends with tape. You will get a kind of "ruler".
Step 2
You can now start bitmap. To do this, master the application of even dots on both sides along the perimeter of the paper strip. The cells will help you with this.
Step 3
To make the dot look like "beads", you just need to lightly press on the tube. A drop of paint will stick to the glass and harden. You should not get carried away and try to "draw" many points at once. The paint should harden for a while. This can usually take about half an hour. Once dry, you can continue working.
Step 4
If you accidentally smeared the drawing, you can correct the situation with a cotton swab and acetone. After gently wiping and removing any error, apply a new pattern.
Step 5
If you already have a little visual skills, you can safely start painting without auxiliary templates. For beginners, it is more convenient to use paper templates. If all of the above is new to you, cut out the outline you like, say, a maple leaf.
Step 6
Fix it in 2 - 3 places with tape or hold it with your fingers. Bitmap along the pattern.
Step 7
Then carefully remove it and continue working. Be sure to wipe off the adhesive tape removal areas!
