Cats and cats love secluded, darkened places where you can retire, sleep, and so that no one can disturb them. A crib house will be the best resting place for a fluffy lady.
It is necessary
- - foam rubber (2 cm thick);
- - synthetic winterizer;
- - satin fabric (damaged bedspread);
- - faux fur;
Instructions
Step 1
Complete the drawing of the house. Make the base of the bedroom oval by drawing 2 circles with a 20 cm radius with a 10 cm distance between the centers.
The size of the side must correspond to the length of the oval: the length of a circle with a radius of 20 cm plus 20 cm, i.e. two distances between the circles. Circle length formula = 2pR. In this case, 2 x 3, 14159 x 20 + 20 = 145.66 cm (150 cm).
Step 2
Cut out a recess in the side and in the roof for an entrance with a depth of 10 cm. The height of the side is 20 cm.
Step 3
Make an oval to create the roof the same as for the base with a circle radius of 30 cm. The perimeter of the oval is 2 x 3, 14159 x 30 + 20 = 208, 49 cm. It turns out about 60 cm of the difference between the base and the roof, which does convex roof.
Cut 4 wedges in the roof, the length of the base of one wedge is 15 cm (60: 4 = 15 cm).
Step 4
Make patterns according to the drawings. Assemble the frame of the house and sheathe it with fabric: the inner lining of the bedroom with faux fur, and the outer one with satin.
Step 5
Make a pattern for the pillow according to the outer size of the bottom. Use as a filler a thick synthetic winterizer folded in four (thin - 8 times). Fasten the synthetic winterizer around the perimeter of the pillow with several stitches so that it does not fall off and put it in the pillowcase.
