Nowadays, baby stores sell a huge amount of ready-made crib accessories. But every mother wants something unusual and individual for her baby. Therefore, it is best to sew the side on the bed yourself, choosing the fabric of the desired color and texture. The style of the side can be made in any way - both integral and separate.
It is necessary
- - fabric 5, 5 m, width 110 cm;
- - foam rubber 2 m, width 150 cm, thickness 1 cm.
Instructions
Step 1
Measure the entire length and width of your child's bed.
Step 2
Transfer these measurements to the fabric with a pencil. But, of course, you can also make a pattern on paper, as you like.
Step 3
Cut the fabric in one piece. All sides and front of the collar.
Step 4
Sew all the edges of the side, but do not sew up one edge.
Step 5
Make the lines on the foam. The size of the foam should be 0.5 cm less than the size of the fabric on each side.
Step 6
Cut out the foam rubber.
Step 7
Put the finished foam rubber into the cover you sewn, through the unsewn edge.
Step 8
Spread everything evenly and sew the edge by hand. It will be easier to open to remove the cover and wash.
Step 9
Sew the ribbons at the corners and in the middle of the collar.
Step 10
Sew the finished side with a wavy tape.
