Homemade foamiran lamb - a symbol of 2015, will be a wonderful gift for your loved ones. It can be used as a decoration for a Christmas tree, or as a fridge magnet. A lovingly made lamb will surely bring you good luck in the coming new year!
It is necessary
- - foamiran - two shades of yellow, orange (other colors can be used);
- - glue gun;
- - thick cardboard;
- - synthetic winterizer;
- - black acrylic paint;
- - double sided tape.
Instructions
Step 1
Cut out part No. 1 from thick cardboard and foamiran. Cut out the part from foamiran with an allowance of 2 mm.
Step 2
Using double-sided tape, we glue the parts made of cardboard and foamiran. We glue the allowance with hot glue.
Step 3
Cut 8 strips 23-25 cm long and 2 cm wide from dark yellow foamiran. Fold in half and make cuts along the strip from the side of the fold along the entire length, not reaching the edge of 1-2 mm.
Step 4
We wind a strip with cuts on a toothpick, lubricating the edge with glue. Cut off the tip of the toothpick.
Step 5
On a light yellow foamiran with a toothpick, circle part number 2. Cut out a slightly smaller part from the synthetic winterizer and glue it to the foamiran part (apply glue to the fom, apply the synthetic winterizer on top).
Step 6
Apply hot glue around the padding polyester and quickly apply the second piece of foamiran, tightly pressing the parts along the glue application line. Cut along the contour. It turned out to be a head.
Step 7
We make ears. Cut out two parts No. 3 from the light shape. Can be tinted with pink pastels. We apply the details to the hot iron. The ears will become slightly bulging.
Step 8
We glue the ears to the head, paint the muzzle with acrylic paints.
Step 9
Using part number 4, we make a hat for the sheep in the same way as we made the head.
Step 10
You can leave the hat as it is. Or we cut orange stripes 10 cm long, 1.2 cm wide, fold in half and make cuts. We twist and glue to the cap.
Step 11
We glue yellow flowers to the calf (step 4). Before sticking the lower one, we make two holes for the legs at the bottom and stretch thin strings through them.
Step 12
For the legs, cut out 8 rectangles from orange foamiran, draw part No. 5 on 4 of them with a sharp stick, glue small balls of padding polyester in the center, apply glue around the padding polyester, leaving a small hole. We put a rectangle on top and press firmly. Cut along the contour.
Step 13
We insert the ends of the ropes into the holes, drip a drop of glue inside and press firmly.
Step 14
We glue the head to the body. Our foamiran sheep is ready!
