There is always an empty glass bottle at home. Don't throw it away. With the help of scrap materials, you can easily turn it into a vase where you can put flowers or give to friends.
It is necessary
- - bottle;
- - PVA glue;
- - twine;
- - a variety of threads;
- - openwork napkins;
- - brush;
- - beads.
Instructions
Step 1
First, try to make an eco-style vase out of a bottle. Its main feature is natural color and natural materials. Prepare a glass bottle for work. Remove the label by soaking in water. Wash it well with soapy water to degrease the surface and dry it.
Step 2
Spread glue on the outside of the bottle. The width of the glue strip should be no more than 2 cm so that it does not dry out. Take the twine and cut the tip at an angle.
Step 3
Start wrapping the bottle. Start from the neck down. Try to lay the thread tightly so that there are no voids. Make a glue strip again and continue wrapping to the bottom of the bottle. At the end, coat the thread with glue and secure it. You can glue the bottom of the bottle with twine.
Step 4
You can use any yarn and colored cord for wrapping bottles. Alternate between narrow and wide stripes. The bottle, which is braided with a floss thread, looks very beautiful.
Step 5
You will spend a little more time making a vase using decoupage technique. Take white acrylic paint and apply it to the surface of the bottle. Wait until it is completely dry.
Step 6
Cut out the motifs you like from napkins. Remove the bottom two layers. Stick only the top layer with the pattern.
Step 7
Apply PVA glue to the desired place. Glue the prepared motive. Dip a soft brush in the glue and gently smooth the pattern to avoid bubbles and tears.
Step 8
Decorate the other side of the bottle with a thread pattern. To do this, cut a thread 20 cm long. Dip the brush first in water and then in PVA glue.
Step 9
Hold the thread with the fingers of your left hand. Style it with curls. Adjust the floss with a toothpick so that it fits properly on the surface of the bottle. Dry the pattern periodically, continuing to make curls. Complete the middle of the pattern with beads.
Step 10
To complete the work, cover the bottle with several coats of acrylic varnish. Complete the vase with some decoration. Tie thin ribbons around the neck.
