Having a sewing machine, you can provide yourself and your family with beautiful, fashionable and interesting things. To do this, choose a beautiful fabric, and a good fit of the product will ensure the correct pattern, which you can create yourself.
Instructions
Step 1
Build a mesh to make a pattern for the jacket. Draw a right angle with apex at point X. Take a vertical line from point X for the middle of the back, and a horizontal line for the level of the top of the neck of the back. Measure a segment from point X horizontally to the right, which will be equal to the width of the jacket along the chest line Cg + Pg, (add 6 cm for the fit) mark the top as X1. X X1 = Cr + Pg
Step 2
Draw a line from X1 down, it is the center line of the front (shelf). Draw a waist line from point X down, measure the length of the back Dtc = 26 cm and mark with point H. Draw a horizontal line from point H to straight line X1 and mark H1.
Step 3
Draw a bottom line. Measure the length of the product from point X down. Di + Pr (for lining) + Pr (for elastic). Di = 45 + 2 + 3 = 50 and mark with point P. Draw a horizontal line from point P to straight line X1 and mark with point P1. Mark segment X X1: 2 with the letter B2 … Lower the vertical line from B2 to P1 and mark P2, mark the point H2 at the intersection with the segment H H1
Step 4
Draw a line for the depth of the armhole. Divide the segment B2, H2 into 3 parts. Mark the line of the depth of the armhole with point D2. Draw horizontal lines from point D2 in two directions.
Step 5
Calculate the backrest width. Measure to the right of point X Shs + Pr = 13 + 3 = 16 and mark with point B. Complete the width of the shelf. Measure the width of the chest to the left of the point X1 Wd + 3 = 11.5 + 3 = 14.5, mark the point B1. Determine the width of the armhole. Drop the vertical lines down from points B1 to straight line D2, this is the width of the armhole. The drawing will come out of 3 parts: shelves, backs and armholes. Calculate from Shs, Shg, Pr and give an allowance for a free fit.
Step 6
Build a jacket pattern in the finished mesh. For the neck of the back from point X, measure one and a half centimeters down, put point M. To the right of point X, measure 5 cm, put M1, build an angle M, 1, M1 = M, X, M1. Connect the points M1, M with a smooth line.
Step 7
Draw the neck of the shelf. To do this, measure to the left of the X1 point, 1 cm more than on the back, i.e. 6 cm and label as M2. Measure down 5 cm from point X1 and mark point M3.
Step 8
Build a line for the shoulder of the back, measure 2.5 cm down from point B2 and put a point E, measure through point E points M1 - Shp + 1 = 9 +1 = 10 cm, add 1 cm to the landing and mark with point A. Draw a line for the shoulder of the shelf. Measure 2.5 cm down from point B1 and put point K. Measure through point K from point M2 Шп = 9 cm and put point A1. Build the lines of the armhole of the shelf and back. Connect points A, D2 and A1 with a smooth line.
Step 9
Build the sleeve of the jacket. To do this, draw two mutually perpendicular lines. Place point X1 in the center. Plot the width of the sleeve along the rim. To do this, draw a radius from point X1, equal to half the length of the armhole. Make notches along the horizontal line, crossing X1 and mark points Z1 and Z2.
Step 10
Determine the height of the okat X1, X2 = 6 cm. X2 Z1 = X2 Z2 = Dpr: 2 (length of the armhole contour), points Z1 and Z2 - the width of the sleeve. Draw the perpendiculars, for this, divide the segments X1 Z1 and X2 Z2 in half. Determine the auxiliary points (3, 4, 5, 6, 7, 8) and round off the sleeve. Divide line segments Z1 3 in half; 3 X2; X2 4; 4 Z2. Draw perpendiculars from the obtained points. From points 5 and 6 - 1 cm, from point 7 - half a centimeter, from point 8 - one and a half centimeters. Draw an okat line through Z1 3 X2 4 Z2. Build the length of the sleeve. Measure down from X2 a line and add 2 cm to the cuff. Measure the width of the sleeve from point C along the horizontal line C C1 = C C2 = Width of the sleeve at the bottom.
