How To Sew A Bando Top Model

Table of contents:

How To Sew A Bando Top Model
How To Sew A Bando Top Model

Video: How To Sew A Bando Top Model

Video: How To Sew A Bando Top Model
Video: HOW TO SEW A BASIC BANDEAU TOP | EASY BEGINNER SEWING TUTORIAL + Free Pattern! 2024, November
Anonim

Probably, every woman at least once would like to sew some little thing for her beloved. Why not make this dream come true? I suggest that you sew one very fashionable designer item - the top of the bando model. Let's get started!

How to sew a top model
How to sew a top model

It is necessary

  • - knitted fabric;
  • - threads;
  • - a needle;
  • - scissors.

Instructions

Step 1

So, let's start making our little thing. The first step is to cut a rectangle out of the fabric. Please note that you can change the length, but the width must remain unchanged. Then another one should be cut off from this cut out rectangle. Its width must necessarily be equal to the measurement of the back between the armpits.

Image
Image

Step 2

Then 2 more strips should be cut. Their width should be 13 and 8 centimeters.

Step 3

Now we take a large rectangle and fold it in half with the front side. We do everything neatly and be sure to equal the edges of the fabric. Then, in the place of the fold, it is necessary to set aside 2 centimeters in width and 15 centimeters down, that is, in length. We draw with chalk and cut off this "triangle" strictly along the line.

Image
Image

Step 4

Next, you need to level everything, so to speak. To do this, bend the edges of the cut by about 2 mm and sew the whole thing on a typewriter. By the way, the line should be laid along the upper edge of the fabric, while pulling it together and forming folds.

Image
Image

Step 5

Moving on to the side seams. Fold the parts with the right side inward and grind the side seams. After the steps taken, you need to grind a rectangular strip 8 centimeters wide to the top edge.

Image
Image

Step 6

Well, now you need to lay out the almost finished "bando" on a flat surface and fasten the fold from the right seam on the side to the middle. Do the same with the other side. It remains only to grind a rectangular strip 13 centimeters wide to the bottom edge of the product. And voila! Your top is ready! Good luck!

Recommended: