An old TV can serve as a frame for a unique aquarium design. For this, a cantilever installation should be used, which is to be reinforced in the bottom area, as well as sealed at the joints.
If an old Soviet-era TV was found in the pantry, which has wood-like decor, speakers and niches in the lower part of the structure, then you should not rush to send it to the trash. From such a rare installation, you can make a completely unique aquarium.
The TV turns, the TV turns … into an aquarium
First you need to open the wooden console, which can be done by removing the back cover. Next, you have to disconnect the internal components, you also need to get rid of the dividing panels.
Then you need to measure the internal space of the structure, this will allow you to purchase elements for the manufacture of an aquarium, corresponding to certain dimensions. You will need tubes, a filter, a compressor and a light bulb. You should make an aquarium that will exceed the screen in width and height.
It is necessary to provide free space between the edge of the aquarium and the lid of the structure, which will allow the overhead light to be installed. The compressor must be located inside the structure to prevent the propagation of noise. The glass base must be placed inside the empty TV.
Final work
Using a drill, you need to provide the holes in the back cover required for the tube. And the presence of additional holes will provide better ventilation, which will prevent the formation of condensation.
Next, you will need to make the top cover, the best option would be the top panel, which can be cut at the seams. In order to use such a door conveniently, you should fix the hinges on the lid. The top panel may not be used; instead, you can use a flip cover made of wood. It will only be important to choose the blank that matches the color.
The previously dismantled rear panel can be replaced in its place. The bottom of the structure must be additionally strengthened, since it will have to undergo significant loads. For this, you can use a sturdier workpiece. Strengthening can also consist in fixing another piece of wood. A more reliable option would be to use a metal cover.
In order to exclude leaks, it is necessary to ensure reliable sealing of joints and surfaces in several approaches. A waterproof polyurethane compound will do an excellent job.
