The conical herringbone will create an unusual holiday atmosphere, will look good in any children's interior and will never bore your baby. An interesting, entertaining green beauty will not only entertain your baby, freeing him from his demanding attention for a while, but will also contribute to the development of the child's hand motor skills.
It is necessary
- - glue stick;
- - pencil;
- - sewing machine.
- Felt (thick fabric):
- - 0.5 m of hard black felt (5 mm thick);
- - 0.5 m of dark green felt;
- - 2 sheets of white:
- - 2 sheets of red;
- - 2 leaves of a pale yellow color;
- - 1 sheet of dark brown;
- - 1 sheet of blue;
- - 1 yellow sheet;
- - 20 cm of green stretch fabric (for edging);
- - 60 cm of twine (any kind of thread);
- - 35 red buttons (large and small);
- - 1.5 m of red (white) tape 3 mm wide;
- - scissors.
- Threads:
- - red, white, green, brown, blue, beige.
Instructions
Step 1
Make a Christmas tree pattern. Take black felt, thread, and pencil. Measure out 60 cm of thread, to one end of which tie a pencil. Attach the opposite end of the thread to the edge of the felt. With the thread pulled, draw a hemisphere with a pencil. Repeat this operation with the dark green cloth.
Step 2
Next, on green fabric, sew 3 rows in the form of curved zigzag hemispheres depicting branches of a Christmas tree with satin stitch or curly stitching.
Step 3
Sew on 28 red buttons randomly but evenly across the entire pattern.
Along the straight edge of the product in the center, make a notch with an angle inward to make it easier to fold into a cone.
Step 4
Cut strips 4, 5 cm wide from the elastic green fabric. Finish the edges of the product with each strip. Join the straight edges of the pattern into a cone, securing with glue or rivets. The tree is ready.
Step 5
Now it's time for toys. Prepare paper toy templates. Lay them out on colored felt sheets, circle them along the contour. Cut out 2 pieces for each toy.
On one side of the toy, you will attach small parts, and on the other side, you will hide all your stitches.
Step 6
Use white felt to make: 2 snowflakes, 2 doves and wings, 2 little angels, 2 lollipops, 2 Santa Claus, 2 deer, 2 gingerbread men, 2 rocking horses.
Step 7
From blue - 2 baubles, 2 bells with a bow, 2 angels.
Red felt will make: 2 candies, 2 boots.
Step 8
Cut out from yellow felt: 2 small stars, 2 small bells, 2 large stars, 1 semicircle 5 cm in diameter for a large star that will flaunt at the top of the tree.
Dark brown - 2 puddings.
Step 9
To make a deer, divide the template into separate elements: body, scarf, eyes, nose, horns. Make a scarf from blue felt, eyes and spots on the body from white, from red from a nose, and horns from brown.
Step 10
Using glue stick or glue, gradually attach all the parts to the base. Once dry, sew a seam around each piece with matching threads.
Step 11
Prepare toy loops. Take a 3 mm tape, divide into 5 cm long pieces. If the buttons are too large, then the pieces should be made longer. The number of segments will depend on the availability of toys.
Step 12
Fold each piece in half, placing the loose ends on top of one half of the toy. Using a glue stick (glue), glue the other half of the toy, covering the ends of the loop. Stitch the edges of the toy with a zigzag stitch, matching the color of the threads.
Step 13
Make a top star. Fold the yellow semicircle in half into a cone and hand-sew the straight sides together. Attach two blanks of yellow stars to the top of the cone, placing the crown between the two lower rays of the star. Secure with stitches. Zigzag the edges of the star.
