A dress in a woman's wardrobe is a necessary thing, it carries a certain aesthetics. A casual dress should be simple, comfortable, but stylish and attractive.
It is necessary
cut of fabric, zipper, tailor's tape, scissors, machine
Instructions
Step 1
A sheath dress, despite its typical cut, is always modern. The style of the dress is simple but elegant, in the style of the 60s - a tight-fitting silhouette, a small sleeve and a narrow collar-collar. The highlight of the model is a long zip fastener on the back, it visually stretches the figure, makes it slimmer. With a cut width of 1.5 m, take one length plus 5 cm for the hem of a thin gabardine with a stretch effect, it holds its shape well and drapes excellently.
Step 2
Take your measurements - hip circumference and dress length. Make a pattern: in front of a one-piece sleeve - 1 piece; ½ backrest - 2 parts. Fold the fabric four times along the lobar, from the fold, set aside ¼ of the hip circumference and draw a vertical line, mark the length of the product on it. The resulting rectangle will be the basis of the pattern.
Step 3
In the upper corner from the fold, set aside 7 cm to the side and 4 cm down, connect the points with a smooth line. From the neck to the edge draw a line of the shoulder with a slight bevel, measure 20 cm down - this will be the sleeve. Round the corner, make a shallow dart at the waist. Cut the dress along the lines, leaving allowances for the seams - 1, 5-2 cm. One piece will be the back - cut it along the middle line. At the front detail, deepen the neckline by 5-7 cm. If you want a neckline, make the neckline larger.
Step 4
Stitch shoulder and side seams. Overlock or fine zigzag seams and open cuts. On the back of the edge of the cut, unscrew (1-1, 5 cm) to the wrong side and iron. Attach the lock, baste, and machine-sew using the zipper foot.
Step 5
Cut out a collar, for this measure the size of the neckline and cut a strip of any width and length equal to the measurement. Bend the part, iron it and sew from the sides to the wrong side, turn it out. Attach the collar to the neckline, on the front of the work, pin it with pins and sew on the bottom part. Bend the top of the collar to the wrong side, fold the edge over the seam, and sew neatly. Roll up sleeves and hem, press and hem.
