Many avid fishermen are faced with the fact that they cannot find the right tackle for a particular reservoir and type of fish. To get out of this situation, they create fishing equipment with their own hands. The most popular type of predator catching is mugs.
It is necessary
Styrofoam, paint (white, red), scaffolding, sinker, hook, nozzle
Instructions
Step 1
Take a piece of Styrofoam. Its thickness should be 25-30 mm and width 150-170 mm. It is necessary to cut out a shape from it - a flat circle. Its size always depends on the object of fishing (perch, pike, zander).
Step 2
Carve a groove from the end of the line cup and make a hole for the pin in the center of the disc. Make the pin out of wood. Its length should be at least 140 mm, and its diameter should be 10-15 mm. One side of the pin should be thickened, and in the other, thin, make a special slot. Insert it into the disc for a better hold, you can glue it.
Step 3
When the base is ready, start painting. The top of the mug is painted red to be more visible from afar. The lower part is white. The pin is usually covered with white or black paint to make it stand out against the background of the disc itself. According to it, the fisherman determines: the circle has turned over or rotates after a bite.
Step 4
An important point in the creation of tackle is the choice of fishing line or nylon cord. Its diameter should be 0.2-0.5 mm. Choose the length of the line so that it is 2-3 m longer than the deepest part of the reservoir. After that, wind the line around the chute.
Step 5
Find the right lead. Its weight should not exceed 20 g. Then attach a leash through the swivel (up to 50 cm). Attach a hook to its end. Note that the triple hook will better hook the object you are catching.
Step 6
At the chosen place of the reservoir in the boat, before putting the mugs on the water, put a live bait on the hook. The selection of live bait depends on the fish itself and its nutrition in a particular habitat.
