The Kalashnikov assault rifle or AK is the simplest and most reliable assault rifle in the world. The bullet of this weapon, invented by Mikhail Kalashnikov, is capable of end-to-end shooting through the rail and burrowing into the sand to a considerable depth. The design of the machine is simple, but drawing a Kalashnikov assault rifle will require some skill and knowledge of the location of the parts.
It is necessary
- - album sheet;
- - pencil;
- - eraser.
Instructions
Step 1
In the middle of the sheet, sketch the machine in pencil. First draw a horizontal line going down slightly on the right side. These will be the barrel and butt of the machine gun. Under the horizontal line mark the handle - a slightly slanted rectangle, the trigger - an arc with a short stroke and the magazine where the cartridges are located. Draw it as a slightly bent wide plate.
Step 2
Draw the parts of the machine in more detail. Make the horizontal line more voluminous by expanding it. Draw the front sight on the left edge of the horizontal line. To do this, draw two vertical lines on the trunk and draw on top of the structure with a small oval hole. Next, depict the aiming block, marking its borders with vertical strokes along the width of the barrel. Raise the top side with an arched line.
Step 3
Draw the receiver. This will be the main part located in the middle of the machine. Draw it with slightly widening horizontal lines. Round off the right end slightly.
Step 4
Draw a vending machine shop. In the middle of the outlines of the weapon, under the bottom, draw two slightly curved lines parallel to each other. Close them with an even short stroke. Draw curved lines already in the middle of the store. Draw a smooth rectangle behind it. Attach the trigger to the top of the figure - a short curved stroke. Draw the handle of the machine. It should be facing away from the store.
Step 5
Draw the butt of a Kalashnikov assault rifle. Continue the barrel of the weapon with two lines widening significantly from the border.
Step 6
Paint the machine gun. Paint the stock, handle and part of the receiver brown, symbolizing wood. Paint all the other parts in a gray shade with the addition of highlights.
