If you have a burned out lamp, and there is no spare at that exact moment, you can go to the store and purchase a new lamp in order to replace the burned out one. However, for a number of reasons, this may not be possible. In this case, you can try to bring the burned out lamp back to life yourself. To do this, you will need to follow some precautions so as not to suffer yourself during the resuscitation of a burned out light bulb.
Instructions
Step 1
First, find a mobile light source. Better if it is some kind of table lamp or carrier. The main thing is that the device is fully functional.
Step 2
Take the burned-out light bulb and carefully screw it into the socket. It would be more correct to say not to screw the bulb into the socket, but slowly and very carefully twist the socket around the bulb. While performing these steps, make sure that the thread of the light bulb, which dangles freely, is not deformed.
Step 3
After you have screwed the burned out light bulb into the socket, the carrier must be plugged into the network. Then slowly turn the lamp so that the ends of the thread, which broke off and dangled, could join. When the ends of the broken thread come into contact, the electric charge that passes between them will act as a kind of electric welding. This will definitely seal the ends of the broken thread. As a result of these actions, you can be sure that the light bulb will still be able to serve you for some time.
Step 4
Pay attention to whether the fact that the bulbs burn out from any particular device. If you do find a relationship, you need to check the device, otherwise you will have to reanimate the bulbs constantly or always keep a large number of spare bulbs. Check if everything is in order with the switch on the device, with the socket, do not forget to test the contacts in the circuit as well. Pay attention to every little thing, because it's not just about burning out light bulbs. Any electrical device can be flammable.
Step 5
If you carefully check the contacts and correct any problems, if any, you can be sure that the new light bulb will not burn out soon. And in order to be more confident in the purchased lamps, pay attention to the marking. Beforehand, it is better to measure the maximum voltage that is possible in your apartment. Do this at night when most electrical appliances are turned off. Buy bulbs with the most appropriate markings.
