For an experienced fisherman, threading a line into a reel is not difficult. However, for a beginner, this can be a real problem, since an incorrectly tucked line significantly complicates the fishing process.
It is necessary
- - fishing line;
- - spinning rod;
- - pencil.
Instructions
Step 1
Attach the reel to the rod.
Step 2
Pick up the line spool. Pass the protruding end of the line through the smallest ring of the spinning rod. Then run the line through the next ring. Continue threading the line through the rings until the end of the line reaches the spool. It is necessary to pass the line through the rings from the end of the rod in order to get a high-quality winding.
Step 3
To avoid kinking, provide some resistance before winding the line onto the reel. To do this, you will need the help of a partner. One person should hold the spinning rod with the reel, and the other person should hold the reel with the line. At the same time, it is undesirable to create too strong resistance, so as not to create new loops, which are formed as a result of too tight winding of the fishing line on the reel.
Step 4
Open the bail of the line tree.
Step 5
Tie a line to the spool.
Step 6
Wind the line onto the spool. At the same time, you must hold the spinning rod, and your partner - a reel with a fishing line on a pencil. Reel in the line by slowly wrapping the reel. In the process, the line should not sag and form circles. If you wind the line in this way, you will be insured against the formation of spirals.
Step 7
Reel in the line to the end, close the bow.
