How To Sew A Knitted Sweater

Table of contents:

How To Sew A Knitted Sweater
How To Sew A Knitted Sweater

Video: How To Sew A Knitted Sweater

Video: How To Sew A Knitted Sweater
Video: How To Knit a Chunky Sweater | Beginner Friendly Step by Step DIY Tutorial 2024, December
Anonim

In the wardrobe of every woman there are always several knitted sweaters of different styles and styles. They are always in fashion, they are pleasant to wear, because the knitted fabric is very soft. A variety of models allows you to wear knitted sweaters at work and at home. And the presence of decorative elements, beads, rhinestones or fur on the sweater will make your new outfit unique and stylish.

How to sew a knitted sweater
How to sew a knitted sweater

It is necessary

  • - knitted fabric;
  • - threads;
  • - scissors;
  • - tailor's chalk.

Instructions

Step 1

Build the pattern yourself. If you wish, you can take any pattern from a magazine of the appropriate size. Place the pattern on the fabric. When cutting parts, do not forget to leave 2-3 cm for the hem of the sleeves and the edges of the product. If you will be processing the edges of the fabric with an overlock, it is enough to leave 0.5-1 cm for the seam allowance. Carefully cut the shelves, back, collar. If you want to reinforce the shoulder seam, add a strip of jersey equal to the length of the shoulder and about 1 cm wide. If the strip is thin, cut it straight along the stitches.

Step 2

Use a needle and contrasting thread to mark the reference marks on the parts. This is done so that the arrows from the cuts do not go on the knitwear. If you are not sure of the correctness of your actions, first sweep the seams or pin them with pins. Chip off the shelf and back. From the side of the shelf, over the seam, pin a strip of knitted fabric to prevent the seam from stretching when worn.

Step 3

Iron the shoulder seams. Check the work of the iron on a piece of knitted fabric, how it reacts to heat treatment. Baste the collar to the neckline, pin and sew on a typewriter.

Step 4

Check if the jersey has a hem at the bottom of the sleeves, shelves and back. If there is, the edges of the product do not need hemming, if not, bend the edges of the sleeve and sew on the front side with any knitted seam. Sew sleeves into armholes and machine sew. Sew the straps to the edges of the sweatshirt. Fasteners can be made with buttons or buttons, whichever you like best. Be sure to overlock the buttonholes. The number of loops and buttons depends on the size of the jacket.

Step 5

Decorate the shelves of your knitted sweater with decorative appliqué, rhinestones, embroidery or beads. As you can see, even a novice dressmaker can sew such a knitted sweater. And in your wardrobe, you will always need a stylish cozy knitted blouse.

Recommended: