Discs that are not recorded at the factory often have no inscriptions, and it is very difficult to understand what exactly is written on it, especially if the box is lost. For these purposes, you can learn to draw on the disc directly while recording information, so that you can easily determine at any time what the disc contains.
It is necessary
Computer with modern configuration. DVD drive
Instructions
Step 1
The most popular disk drawing program is NERO. Thanks to this program, which simultaneously writes information to the disc itself, you can apply images and inscriptions to the surface of the disc. In this case, you can even pick up a program that puts an image on the working surface, if there is free space on the disk.
Step 2
You can also use another program, LabelFlash, which can overlay images on the back of the disc, thereby allowing you to always see what is on the disc. It is necessary to choose blanks that support this technology.
Step 3
If it is necessary to reflash the drive, this can be done using programming. This is another option for drawing on disk when writing with NEC software from NERO when it is not possible to supply a paintable drive. To do this, download a special program for changing the drive ID and a new firmware, as well as a program for firmware.
Step 4
The file from the downloaded program is launched and the required drive configuration is selected.
Step 5
To restart a computer. Already in the BIOS it is clear that the drive has changed to the required one, however, with the old firmware. The system then needs to find new hardware and the firmware starts up. After a reboot in the BIOS, it is clear that the drive firmware has changed, the system detects a new device that is ready to work. Now you can take images on discs using NERO.
