According to stereotypes, classic trousers are only suitable for the office. However, today most of the stronger sex, who want to look spectacular, increasingly choose just such a model as their everyday clothes.
It is necessary
- - trouser fabric;
- - sewing machine;
- - zipper closure.
Instructions
Step 1
For dress trousers, take a plain or thin longitudinal stripe trouser fabric made of woolen or mixed fibers. Cut out two front and back halves of the trousers, the facing of the cut, as well as two parts of the hem and the side of the front half, one-piece with a burlap pocket.
Step 2
Sweep the darts and grind them down. Press the depth of each dart to the middle seam line. Then start making side pockets with cut-off barrels. Fold the burlap right sides with the front halves of the pants. Run a stitch along the entrance to each of the pockets and turn to the wrong side.
Step 3
Stitch the entrances to the pockets, departing from the seam line 0.7 cm. Along the alignment lines, place the front halves on the side parts and pin or sweep. Sew the burlap sections from the inside of the pants. Baste the burlap under the front halves.
Step 4
Sew step and side seams. Stitch down from the zipper opening mark to the crotch seam. Sew on the zipper. To do this, fold the facing with the front left half with the right sides and stitch.
Step 5
Then turn the piping inside out and press the hem down. Press the allowance along the right side of the cut to the wrong side, leaving half a centimeter for the fastener allowance to the mid-front line.
Step 6
Sew the fastener under the edge of the seam allowance, placing the teeth firmly in the fold. Chip off the edges of the cut. Sew the loose tape to the piping without grabbing the left half of the trousers. Stitch the left half along the clasp.
Step 7
Sew the rounded cutoff cuts. Turn it out and pin it to the cut allowance. Stitch the slanting allowance, close the zipper. Extend the topstitching to the bottom of the fastener by grasping the edge.
Step 8
Make belt loops from the fabric, which then sweep to the upper edge of the product. Sew on the waistband and stitch along the back middle seam. Press the cuffs to the wrong side, and sew or sew on by hand. Press the folds-arrows down.
