Every pilot's fears can sometimes come true. An expensive helicopter toy can lose control and get into an accident. And such a toy plane crash is not only a sad phenomenon, but also very instructive.
It is necessary
- - gyroscope;
- - soldering iron;
- - solder;
- - instructions from the helicopter, in paper form or on the Internet.
Instructions
Step 1
After the accident, carefully inspect the scene of the accident, all the components and assemblies of the helicopter.
Step 2
See if there are any malfunctions other than the detached gyroscope. If there are any, remove them.
Step 3
Find out how the gyroscope was positioned before it came off. See how this element was located according to the instructions. The dimensions of the gyroscope are very small. Most often it is a chip, the dimensions of which are comparable to the dimensions of a small coin.
Step 4
Inspect the part for damage before repairing. If there are defects, you need to change the gyroscope; if they are not there, you can determine the serviceability only by trying to solder and seeing if the toy works.
Step 5
Place the gyroscope in its proper place, take a soldering iron and solder. Then solder the part back in.
Step 6
Collect the toy. Install all parts in their place.
Step 7
Try flying. Leave the flight to an experienced pilot - if the gyroscope is not working properly, there is a risk that the toy will break completely. If at the moment there were no problems other than the torn off gyroscope, there is still a chance to replace the board completely, keeping the toy.
