Even the simplest color music can decorate a small room. You do not need to have deep knowledge of electronics to create a small lighting accompaniment.
It is necessary
- - Garland;
- - active speakers.
Instructions
Step 1
Use the case of computer speakers as a case for home color music. In this case, you need a working speaker system, the power of which ranges from one and a half to five watts. All manipulations must be performed with the secondary column. Usually it is connected to the main speaker, which, in turn, is connected to the mains and the computer sound card.
Step 2
Disconnect the speaker system from the mains and the personal computer. Remove the back wall of the desired speaker. To do this, unscrew a few screws or perform other manipulations. Try not to damage the speaker case.
Step 3
Remove the speaker from the speaker box. To do this, unsolder or cut the wires connecting it to the amplifier of the other speaker. Take the light bulb of the desired color from the Christmas tree garland. If the power of the speaker system is almost twice the power of the lamp, then use two bulbs at once.
Step 4
Remove the speaker from the speaker box. To do this, unsolder or cut the wires connecting it to the amplifier of the other speaker. Take the light bulb from the Christmas tree garland. If the power of the speaker system exceeds the power of the lamp by almost several times, then use the required number of elements of different colors at the same time. Connect them to the wires using the parallel connection method. Secure all bulbs so that they fit into the hole in the speaker box.
Step 5
Remember that your speaker must be in mono mode. If you listen to a stereo track, the lamps used may not light up in a timely manner. This is because the signal is different for the left and right channels.
