Every thing should have its place. Is not it? The jewelry box is considered to be a repository of jewelry. I suggest you do it yourself.
It is necessary
- - plywood 5 mm thick;
- - thin rail;
- - gypsum tiles;
- - metal handles;
- - a variety of plastic (plywood or plaster) parts;
- - twisted silk cord;
- - acrylic paint;
- - aerosol acrylic white paint;
- - glue gun;
- - sponge;
- - jigsaw;
- - sandpaper;
- - drill;
- - paper;
- - pencil.
Instructions
Step 1
First of all, you need to decide on the size of the future crafts. Then make a template on paper and transfer it to the plywood. Saw out all parts and sandpaper to remove irregularities and roughness. Now you need to assemble the base of the box. To do this, glue all the parts with a glue gun.
Step 2
On the underside of the craft cover, you need to glue the slats. To do this, first mark it and only then attach the slats. They are needed so that the lid of the box does not move when it is closed.
Step 3
On the upper side of the cover of the product, you need to glue the plaster tile with an ornament. You can also decorate the end and back walls of the box with all kinds of plastic or wooden parts.
Step 4
On the side walls of the product, use a pencil to make 2 markings. According to the obtained markings, 2 holes should be drilled, with the help of which the metal handles will be fixed.
Step 5
Now the base of the box needs to be painted with white acrylic paint using a simple sponge. Just keep in mind that all decor elements must be completely painted over. Also, do not forget to apply paint to the inner surface of the product.
Step 6
Use spray paint to paint metal handles. Once they are dry, you can fix them on the box.
Step 7
It remains only to decorate the product with a twisted cord. It must be glued both along the entire perimeter of the lid and along the perimeter of the bottom of the craft. An unusual shabby-style box is ready!
