An anchor is a special metal structure designed to secure a ship in one place. It has many different types, but the base is always the same - a heavy bottom, which is fixed on a straight metal vertical. The drawn anchor is most often used as a nautical symbol.
It is necessary
- - album sheet;
- - pencil;
- - eraser.
Instructions
Step 1
Draw a modern anchor design with two sharp edges at the bottom. Draw a vertical line in the middle of the sheet, slightly narrowed at the top and widened at the bottom. This will be the anchor spindle. Draw a circle around the upper border of the spindle, the so-called. eye - the place of attachment of the cable or rope for raising or lowering the anchor. At the top of the vertical, draw a horizontal line - the stock. Secure the lower part of the spindle with a large tick.
Step 2
Draw the individual parts of the anchor in more detail. Draw the spindle in the form of two straight lines, each of which at the bottom draw out in different directions, forming an anchor, its main part. This way you get two anchor horns. The joints of the lines should be smooth. Make each horn three-dimensional by adding another line following the outline of the anchor. At the tips of the horns, depict the lobes - wide plates with sharp outer tops. Note that the heel of the anchor should be sharp enough.
Step 3
Draw the details of the stock. From an inclined straight line at a short distance, draw another one with the same slope, but slightly convex, thus delimiting the lateral and lower parts of the stem. Connect both lines with a few vertical strokes. Now draw another oblique line repeating the outlines and continue vertical strokes at an angle of slightly more than 90 degrees. Draw a neck above the upper border of the stem - draw a small rectangle and divide it in half with a vertical line. Make the eye ring double.
Step 4
Darken individual sections of the anchor: the lower part of the lopa and the right horn. Shade the stock with short lines and the neck, its right part. Also darken the part of the spindle that goes along the right border of the vertical - the drawn anchor is ready.
